Saturday, October 6, 2012

It's nice to be working on the TOP of the boat!

 
Following our successful "roll over" party, we had a very good opportunity to do a general reorganizing of the garage. Nothing major mind you, since we have a boat to build :), but it did provide us with the chance to move some things around a bit.
 
Mostly what we found was SAWDUST!  EVERYWHERE! That's when my train of thought took me back to my younger days and I just figured it'll all get sawdusty again, so might as well just get back to boat building....!
 
Maybe someday I'll be better about things like that......! (ya, right!)   
 
 
The first steps to accomplish on our now upright vessel, remove jagged edges and start building the deck structure. Can't "Swab the Deck" if you don't have one!!
 
Leftovers from the planking and fiberglass process

Installing the starboard side carling

 

When you install "curvy" boards like this, I guarantee you wish you were born with a third hand or had a helper. I found this out the hard way since Kathy wasn't available today. Sigh...
 
 
Pirate

Friday, September 28, 2012

Nothin' Like Rollin' a Boat Over on Your Birthday!!

It turned out to be a lot of work on my birthday, but well worth it! We've been looking forward to the day that we would finally be able to turn the hull over and commence with the top half of the boat. That day came today!! Kathy gave me the plans for our Minuet last year as a birthday present, so it only seemed fitting to have such a momentous day on this years celebration!
 
It was only the two of us, so we had to think it through before starting, but it worked out well.
 
First we removed the building form from underneath...

...and then Kathy just shoves it out into the sunshine!

Ahhh, fresh air!

We enlisted the dog and a few blankets and...

...there ya go. It's right side up!
 It actually went smoother than we expected. I hung a tow-strap in the tree and that handled the bow so the two of us could lift the stern. We gently rolled it over in one motion and didn't even break the skeg off or scratch the bottom paint. Kewl!!!
 
Time to add a trailer to the equation.

Since it's a folding trailer, it made it very easy for us to load!

..one happy birthday boy!!!!!

It took awhile to fit the boat to the trailer, but it works!

even a peek inside...

...and back into the garage we go for part two!!
 
What a fun day of work! Have a great weekend!!!
 
 
Pirate

Wednesday, September 26, 2012

Back to the build!

 
Following a patient (!?) several days to allow the fiberglass to cure on the hull, It's finally time for the 1-2-3 process to add anti-fouling paint to the bottom. We are using Pettit stuff and that's their recommendation. 1) Bio-Blue to clean, 2) Prime, and 3) Paint. No weeds here for sure!
 
Clean her up...

Prime her up...
Add a little color...!
 
Every little Pirate ship needs a black hull! :)
 
Pirate 


Monday, September 24, 2012

Be Careful What Ya Wish For...!!

 
Was that me whinin' about having to wait for the fiberglass to cure before painting? Was that me implying that I had time on my hands? Oh boy, what a mistake!!
 
It kinda reminds me of the old biker saying, "I just started out changin' spark plugs...the next thing ya know, I was painting the frame!"
 
My buddy (former buddy now) tells me he ordered too much topsoil and I could take as much as I needed for free. I innocently replied I could use a pickup truckload and my back has hurt ever since!
 
Topsoil leads to yard work, yard work leads to....well, WORK!!!
 
I knew our yard needed help, but I didn't expect to fix that problem right now!
 
OK, it needs ALOT of help!
 
 
 
diggin leads to dirt...

 
dirt leads to grass....
 
 
and grass leads to the before mentioned sore back!

 
...but even I have to admit, the "after" picture sure beats the "before" picture!!
 
But having said that, I can't wait to get back to the boat project tomorrow! Somehow, the prospect of painting the hull seems much easier now!
 
(BTW, I did sneak out and finish the skeg so it's ready for paint, too!)
 
 
It can't ALL be work!
 
Pirate
 
 
 
 


Saturday, September 22, 2012

Just Killin' Time...

 
 
Here we are just waiting for the fiberglass to cure before we can start the bottom paint part of the project. About the only thing to do is make the pieces that need to be in place prior to paint. Bow eye, some rigging fittings, and today, the skeg! (no, not KEG!)
 


With all that now taken care of, all we can do is wait! :(
 
We are both very excited to finish the bottom paint since after that is applied, it will be time to turn the hull over, place it on the trailer, and start the top half! Very Kewl!!!
 
Pirate


Friday, September 21, 2012

Shine On..!

 
Morning folks! No more timeline in the corner as the blog timestamp will be current! Caught up at last!
 
It's a little weird after several weeks of hard work on our boat, we have to wait about a week for the fiberglass to cure before painting the bottom and sides. There are several small projects of course, but in general, we have a few days to relax. Nice!
 
 
Took my coffee to the boat barn/garage this morning to stare and dream and found the boat making friends with my bike....!
 
 
Quite a reflection! I guess all those "sanding hours" do pay off!
 
Pirate


...More Sanding!!!!! :(

Timeframe: September 19, 2012


In our last episode, we had just finished the basic fiberglass work.
 
 
So what's the next step?
More Sanding!!!...uggh!
 
 

 
...yes I wore a mask..!
 
This whole concept of applying 2 coats of something and then sanding 1 1/2 back off again is enough to drive anyone crazy!!!
 
...until you see the results!
 
 
The fun of creating this blog has been looking back at the early pictures and comparing those to today's progress. I guess we are getting somewhere!
 
Pirate